MTX Series

MTX3 Matrix Processor

26 x 8 Matrix Mixer / Signal Processor

  • 8ch mic/line input and 8ch analog output
  • 16ch YDIF digital I/O
  • SD Card Slot for playback

MTX5-D Matrix Processor

34 x 16 Matrix Mixer / Signal Processor

  • 8ch mic/line input and 8ch analog output
  • 16ch YDIF digital I/O
  • 16ch Dante digital I/O
  • 1x MY Card slot
  • SD Card Slot for playback

EXi8 Giriş Çoğaltıcı

EXi8 giriş genişleticileri analog mikrofon/hat seslerini dijitale dönüştürür ve Yamaha’nın YDIF formatını kullanarak sinyali iletir. Exi8’in ön amfileri Ethernet kablo kullanılarak MTX işlemciden uzaktan kumanda edilebilir.

EXo8

Exo8 çıkış genişleticileri YDIF aracılığıyla MTX Serisi işlemcilerden gelen dijital çıkışları dönüştürerek yüksek kalitede analog ses üreten 8 kanallı DA dönüştürücüler içerir.

DCP1V4S Digital Control Panel

1 Volume & 4 Switch equipped Wall Mount Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCP4S Digital Control Panel

4 Switch equipped Wall Mounut Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCP4V4S Digital Control Panel

4 Volume & 4 Switch equipped Wall Mounut Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCH8 Digital Controller Hub

Divides the control line from host devices such as the Yamaha MTX/MRX series into up to 8 lines.

PGM1 Paging Station Microphone

The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.

  • Dante network support
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 4 units can be connected per system
  • PoE powered
  • Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
  • Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)

PGX1 Paging Station Extension

The PGX1 is a paging station extension that can be used with the PGM1.

  • Function expansion for the PGM1
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 2 units can be connected to each PGM1
  • Dimensions: 132(W) × 56(H) × 154(D) mm
  • Weight: 0.9 kg (excluding connecting bracket)

MCP1

Wall-Mount Controller

  • 6 buttons can be assigned to any functions * MTX/MRX series functions (components) are specified via the MTX-MRX Editor
  • Multi-language displays supported
  • Four user levels for access management
  • Up to 16 units can be connected per system
  • PoE powered
  • Back can adapter supplied
  • Dimensions: 149(W) x 125(H) x 18(D) mm
  • Weight: 0.5 kg

SWR2100P-10G L2 Switch

The SWR2100P series network switch equipped with ten RJ45 ports.

  • Ports available for PoE power supply: 1-9 / Up link port: 9 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2100P-5G L2 Switch

The SWR2100P series network switch equipped with five RJ45 ports.

  • Ports available for PoE power supply: 1-4 / Up link port: 5 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2311P-10G L2 Switch

Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily

  • LAN ports equipped with PoE supply: 8(1-8)
  • LAN/SFP combo ports: 2(9, 10) (The LAN port and SFP slot are exclusively used)
  • PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all PoE ports