Pad/Module Compatibility Table
| INPUT | XP 120SD /120T /100SD /100T (3 Zone) | TP 120SD /100 (3 Zone) | TP65S (3 Zone) | TP65 /60 /80 | TP80S (2 Zone) | KP 125W /125 /65 /60 /80S /80 | PCY 155 /135 /150S /130SC (3 Zone) | PCY 130S /65S /80S (2 Zone) | PCY 130 /65 /60 /80 | RHH 135 /130 (2 Zone) | RHP 120SD /120 /100 /80 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DTX500 | 1 |  *1 |
*1 |
|
 |
 |
|
|
|
|
*3 | *3 |
| 2/10-4/12, 8/9 | |
|
|
|
|
|
|
|
|
*3 | *3 | |
| 7 | |
|
|
|
|
|
|
|
|
|
*3 | |
| 5, 6 | |
|
|
|
|
|
|
|
|
*3 | *3 | |
| DTX900 | 1-5 | *1 |
*1 |
|
|
|
|
*2 |
*2 |
|
*3 | *3 |
| 6-8,12-15 | |
|
|
|
|
|
*2 |
*2 |
|
*3 | *3 | |
| 9 | |
|
|
|
|
|
*2 |
*2 |
|
|
*3 | |
| 10/11 | |
|
|
|
|
|
|
|
|
*3 | *3 | |
| DTXTREME III | 1-5 | *1 *h |
*1 |
|
|
|
|
*2 |
*2 |
|
*3 | *3 |
| 6-8,12-15 | *h |
|
|
|
|
|
*2 |
*2 |
|
*3 | *3 | |
| 9 | *h |
|
|
|
|
|
*2 |
*2 |
|
|
*3 | |
| 10/11 | *h |
|
|
|
|
|
|
|
|
*3 | *3 | |
| DTXPRESS IV | 1 | *1 |
*1 |
|
|
|
|
|
|
|
*3 | |
| 2/10-4/12,8/9 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 7 | |
|
|
|
|
|
|
|
|
|
|
|
| 5,6 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTXPLORER | 1 | |
|
|
|
|
|
|
|
|
*3 | |
| 2-4 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 5,6 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 7 | |
|
|
|
|
|
|
|
|
*g |
|
|
| 8/9 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTXTREME IIs | 1-5 | |
*1 |
|
|
|
|
*2 |
*2 |
|
*3 | |
| 6,7 | |
|
|
|
|
|
*2 |
*2 |
|
*3 | |
|
| 8 | |
|
|
|
|
|
*2 |
*2 |
|
|
|
|
| 9/10-15/16 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTXTREME | 1-5 | |
 |
|
|
|
|
*2 |
*2 |
|
*3 | *f |
| 6,7 | |
|
|
|
|
|
*2 |
*2 |
|
*3 | |
|
| 8 | |
|
|
|
|
|
*2 |
*2 |
|
*e |
|
|
| 9/10-15/16 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTXPRESS III | 1 | |
|
|
|
|
|
|
|
|
*3 | |
| 2,6,7 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 3-5 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 8 | |
|
|
|
|
|
|
|
|
*d |
|
|
| 9/10 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTXPRESS II | 1 | |
|
|
|
|
|
|
|
|
*3 | |
| 2,6,7 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 3-5 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 8 | |
|
|
|
|
|
|
|
|
*c |
|
|
| 9/10 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTXPRESS | 1 | |
|
|
|
|
|
|
|
|
*3 | |
| 2-7 | |
|
|
|
|
|
|
|
|
*3 | |
|
| 8 | |
|
|
|
|
|
|
|
|
*b |
|
|
| 9/10 | |
|
|
|
|
|
|
|
|
*3 | |
|
| DTX | 1-7 | |
|
|
|
|
|
*2 |
*2 |
|
*3 | |
| 8 | |
|
|
|
|
|
*2 |
*2 |
|
*a |
|
|
| 9/10,11/12 | |
|
|
|
|
|
|
|
|
*3 | |
- : Only produces the single voice assigned to the head (bow) section.
- : Produces the individual voices assigned to the head and open/closed rim (bow and edge/cup) sections. (2 voices)
- : Produces the individual voices assigned to the head, open rim, and closed rim (bow, edge and cup) section. (3 voices)
- : Produces the individual voices assigned to the head and closed rimsection. (2 voices, the open rim is not available.)
- *1 : Compatible with pad control function
- *2 : Compatible with mute technique (hold the edge and hit pad section to produce alternate sound)
- *3 : Not compatible
Make changes to the settings below. Refer to the owner's manual for further information. The RHH135/130 is especially designed to take advantage of the powerful features offered by the DTX900, DTXTREME III/IIs and DTXPRESS III/IV. Be aware that the RHH135/130's performance will not be the same as that with the DTX900, DTXTREME III/IIs or DTXPRESS III/IV.
1. In the Utility Mode 8.FC offset page, set the FC offset value to “-5”.
2. In the Trigger Edit Mode 5. Level Range page, set the minimum level to “20%”.
First proceed with the setting in Step 1. In some cases, crosstalk generated from a foot-closed sound may trigger a Hi-Hat sound even though the setting in Step 1 has been carried out. If crosstalk is obvious, proceed to Step 2. Since the setting in Step 2 makes low velocity triggers harder to detect, we recommend that you experiment with the setting's values to best match your playing style and conditions.
Make changes to the settings below. Refer to the owner's manual for further information. The RHH135/130 is especially designed to take advantage of the powerful features offered by the DTX900, DTXTREME III/IIs and DTXPRESS III/IV. Be aware that the RHH135/130's performance will not be the same as that with the DTX900, DTXTREME III/IIs or DTXPRESS III/IV.
1. In the Utility Mode Hi-Hat Offset page, set the HH OffS value to “-5”.
2. In the Trigger Setup Edit Mode Gain page, Minimum Velocity, set the Gain to “40%”.
First proceed with the setting in Step 1. In some cases, crosstalk generated from a foot-closed sound may trigger a Hi-Hat sound even though the setting in Step 1 has been carried out. If crosstalk is obvious, proceed to Step 2. Since the setting in Step 2 makes low velocity triggers harder to detect, we recommend that you experiment with the setting's values to best match your playing style and conditions.
Make changes to the settings below. Refer to the owner's manual for further information. The RHH135/130 is especially designed to take advantage of the powerful features offered by the DTX900, DTXTREME III/IIs and DTXPRESS III/IV. Be aware that the RHH135/130's performance will not be the same as that with the DTX900, DTXTREME III/IIs or DTXPRESS III/IV.
1. In the Utility Mode Hi-Hat Offset page, set the HH OffS value to “-5”.
2. In the Trigger Setup Edit Mode Gain page, Minimum Velocity, set the Gain to “40%”.
First proceed with the setting in Step 1. In some cases, crosstalk generated from a foot-closed sound may trigger a Hi-Hat sound even though the setting in Step 1 has been carried out. If crosstalk is obvious, proceed to Step 2. Since the setting in Step 2 makes low velocity triggers harder to detect, we recommend that you experiment with the setting's values to best match your playing style and conditions.
In the Trigger Setup Edit Mode Pad Type page, set the pad type (Type) to RHH.
Make changes to the settings below. Refer to the owner's manual for further information. The RHH135/130 is especially designed to take advantage of the powerful features offered by the DTX900, DTXTREME III/IIs and DTXPRESS III/IV. Be aware that the RHH135/130's performance will not be the same as that with the DTX900, DTXTREME III/IIs or DTXPRESS III/IV.
1. In the Utility Mode [UT 7] SYSTEM3 page, set the FC offset value to “-5”.
2. In the Trigger Edit Mode TrgSens2 (trigger sense 2) page, set the minimum level to “20%”.
First proceed with the setting in Step 1. In some cases, crosstalk generated from a foot-closed sound may trigger a Hi-Hat sound even though the setting in Step 1 has been carried out. If crosstalk is obvious, proceed to Step 2. Since the setting in Step 2 makes low velocity triggers harder to detect, we recommend that you experiment with the setting's values to best match your playing style and conditions.
Position sensing function is only available on Input 1.
Make changes to the settings below. Refer to the owner's manual for further information.
In the Trigger Setup Edit Mode [TRIG2] page, set the pad type (Type) to RHH.
Please make sure update DTXTREME III with the DTXTREME III Firmware Update Program (DTX900 Firmware v1.00) to use XP120SD/120T/100SD/100T
Click here to download firmware.